How to Disassemble (Rebuild) a Pop Bumper on Black Knight Pinball
I wanted to provide a quick guide on disassembling a pop bumper and replacing any parts that are broken. When the pop bumper is
These post are from my early days of blogging. I got a Black Knight and tried to document a number of repairs with it.
I wanted to provide a quick guide on disassembling a pop bumper and replacing any parts that are broken. When the pop bumper is
As I am waiting for parts to arrive, I started to dissemble the four flippers. When I was about done remove all the flippers,
The sounds on Black Knight have been somewhat erratic. The sounds are there, but often it’s very soft and other times normal. I couldn’t
I started going through all the switches and adjusting some of the drop targets. I noticed that a couple were not scoring and wanted
Since the top playfield was removed, I took the time and cleaned and adjusted the bottom playfield. Put everything back together, and game is
Did a partial cap kit for the speech and sound board. I didn’t have all of the caps on hand, but replaced the ones
The parts game in for the power supply, and installed a new 3J1 and 3J2 header pins. I also replaced the bridge rectifier along
Got my order in from two different vendors today. I already removed the 5101 RAM from the CPU board and just needed to add