BK Flipper Rebuild Part I (6-1-18)
As I am waiting for parts to arrive, I started to dissemble the four flippers. When I was about done remove all the flippers,
30-Minutes Articles
What goes on from day-to-day activities in my shop at 30-minute intervals.
BK PS Revisited (5-5-18)
The parts game in for the power supply, and installed a new 3J1 and 3J2 header pins. I also replaced the bridge rectifier along
NVRAM & Special Soleniod Board (5-3-18)
Got my order in from two different vendors today. I already removed the 5101 RAM from the CPU board and just needed to add
40-Pin Inter Connect (5-1-18)
Thirty minutes went really quick today as I spent most of the time boxing items and getting them ready to ship out. I try
BK Driver & CPU Board (4-30-18)
I started to look at the driver and CPU board and noticed that there was some corrosion on some of the transistors (special solenoid
BK Power Block III, Testing Power (4-29-18)
Had time today to finish up wiring the AC cord, fuse, and fuse block. Put it back in the game and wanted to test
BK Power Block II, Replacing a Power Cord (4-28-18)
Started to reassemble the power block and added a new fuse holder, fuse, and power cord. I have a drawer full of used and
BK Power Block (4-27-18)
I pulled the power block from Black Knight and gave it a quick vacuum. Noticed that the fuse holder and fuse were heavily corroded
No Power (4-25-18)
I wanted to test the power supply, so I just plugged in the game without worrying about the power cord. (Replacing the power cord
BK Cap kit (4-24-18)
Took a few minutes this morning and installed the cap kit. I believe the power supply is now done and will have to replace
Please help with hosting costs
