40-Pin Inter Connect (5-1-18)
Thirty minutes went really quick today as I spent most of the time boxing items and getting them ready to ship out. I try
BK Driver & CPU Board (4-30-18)
I started to look at the driver and CPU board and noticed that there was some corrosion on some of the transistors (special solenoid
BK Power Block III, Testing Power (4-29-18)
Had time today to finish up wiring the AC cord, fuse, and fuse block. Put it back in the game and wanted to test
BK Power Block II, Replacing a Power Cord (4-28-18)
Started to reassemble the power block and added a new fuse holder, fuse, and power cord. I have a drawer full of used and
BK Power Block (4-27-18)
I pulled the power block from Black Knight and gave it a quick vacuum. Noticed that the fuse holder and fuse were heavily corroded
No Power (4-25-18)
I wanted to test the power supply, so I just plugged in the game without worrying about the power cord. (Replacing the power cord
BK Cap kit (4-24-18)
Took a few minutes this morning and installed the cap kit. I believe the power supply is now done and will have to replace
System 3-11C Power Supply Rebuild for Williams Pinball
C1 = 100uf, 150V C3 = 100uf, 150V C5 = 100uf, 100V C7 = 100uf, 25V (radial) C8 = 47uf, 50V (radial) C9 =
BK HV Rebuild PS (4-20-18 & 4-21-18)
Spent the last two days rebuilding the high voltage side of the power supply. Still waiting for the cap kit to arrive in the
Add Fuses to BK (4-18-18 & 4-19-18)
What I thought would be a 5-minute job took more than 30 minutes to do. I was going to simply add 2 fuses two
Please help with hosting costs
