Adding a Pull-out Shelf to a Dynamo Cabinet
I noticed that the shelf was missing when I picked up the arcade. This is one of the main reasons why I wanted this
Building and Wiring an Arcade from an Empty Dynamo Cabinet
A while back I saw a Craigslist Ad for an empty cabinet. I was interested in getting an extra cabinet for my shop, so
Mounting a k7000 Monitor into a Dynamo Arcade Cabinet
I wasn’t sure where to start with this project, but I know I had a k7000 monitor laying on the floor of my shop.
How to Disassemble (Rebuild) a Pop Bumper on Black Knight Pinball
I wanted to provide a quick guide on disassembling a pop bumper and replacing any parts that are broken. When the pop bumper is
Williams Black Knight Pinball Start Problem
This Black Knight pinball had a problem that would not start a game even though all three balls were in the trough. I checked the
BK Flipper Rebuild Part I (6-1-18)
As I am waiting for parts to arrive, I started to dissemble the four flippers. When I was about done remove all the flippers,
BK Sound Problems (5-30-18)
The sounds on Black Knight have been somewhat erratic. The sounds are there, but often it’s very soft and other times normal. I couldn’t
BK Switches & Lights (5-27-18)
I started going through all the switches and adjusting some of the drop targets. I noticed that a couple were not scoring and wanted
BK Cleaning Bottom Playfield (5-24-18)
Since the top playfield was removed, I took the time and cleaned and adjusted the bottom playfield. Put everything back together, and game is
BK Speech and Sound Board Cap kit (5-16-18)
Did a partial cap kit for the speech and sound board. I didn’t have all of the caps on hand, but replaced the ones
Please help with hosting costs
