BK CPU & Driver Boards Part II (5-9-18)
Finished up the driver board today. Replaced one header connector along with resolding the rest of the pins. There is bunch of header pins
Repairs dealing with pinball.
Finished up the driver board today. Replaced one header connector along with resolding the rest of the pins. There is bunch of header pins
Not much of an article today. Just played some pinball and fixed a couple minor issues with a couple games. T2 had one stand-up
C1 = 100uf, 150V C3 = 100uf, 150V C5 = 100uf, 100V C7 = 100uf, 25V (radial) C8 = 47uf, 50V (radial) C9 =
Spent the last two days rebuilding the high voltage side of the power supply. Still waiting for the cap kit to arrive in the
What I thought would be a 5-minute job took more than 30 minutes to do. I was going to simply add 2 fuses two
I had a few connectors and pins and started repinning some of the female connectors for BK. I just go one wire at a
I started looking at the PS for BK and seeing what I can do without ordering parts. I went through my .156 connectors and
Found the following on Pinside: BEFORE you turn it on review the following: Batteries: replace batteries and ensure battery holder has no cracks or
Had a chance to do my first look over of the pinball. The previous owner had it broken down and ready to move out