Drop Targets Black Knight

Still working underneath the playfield and pulled the drop target assemblies to clean and adjust.  Somehow the switches were mauled on these units.  Here’s how I disassembled the unit:

droptarget1
Remove the 2 screws on the bottom of the unit.
img_4381
Remove the bottom plate that is connecting the switches and slide it out of the way.
droptarget4
Remove four screws and remove the thin metal bracket  from the backside.
droptarget2
Remove drop target by sliding out.  Make sure the spring is released from the metal tab.
img_4386
Remove bracket, plunger, and coil from assembly.
droptarget3
I removed the metal cage, but probably don’t have to do it.  If so, remove the 6 screws. 
img_4390
Replace coil sleeve.
img_4395
Clean, reassemble,and adjust.

Leave a Reply

Your email address will not be published. Required fields are marked *